Translations:Manuals:BXFbl:TelemetryInfo/3/en

JETI EXBUS

To enable the telemetry display on your JETI transmitter, open the extended/advanced menu settings and go to the "Timer/Sensor" menu. Here you can select the various telemetry sensors provided by your BEASTX System. You can then add these sensors to one of the telemetry screens on the transmitter's home screen.

Once the sensor connection between the receiver and your BEASTX System is established, the corresponding sensor values must be visible in this telemetry/sensor menu on the transmitter. If no values are shown there, this usually indicates a wiring problem between the receiver and your BEASTX System - please check the connection in this case.