Translations:Manuals:MBPlusFblV5:Parametermenu/12/en

Pitch boost (H)

PARAMETER MENU point H allows you to setup the collective pitch boost function. This function causes that the faster you move the thrust stick, the more additional collective pitch will be exposed. This can be especially useful in 3D aerobatics when very rapid collective pitch changes are necessary for certain flight maneuvers, as hereby dynamically the required control stick deflection will be reduced. However, the maximum pitch value will not be exceeded.

When the setting is too high, this can cause the rotor blades to stall when giving very fast collective pitch commands. The collective pitch will feel slow and spongy, precisely causing the opposite effect as desired. Also note that a high setting can make the pitch control inprecise and more sensitive, as when giving fast stick input, the pitch will overshoot.

Start from the "low" setting, gradually increasing to the desired level, until you have found your ideal setting. How high this feature is adjustable without causing any adverse effects depends on many factors, such as maximum pitch values, ​​pitch curve, swashplate servos, main rotor blades, system headspeed, pilot skills, ... .

Status-LED	Pitch boost
purple	off
red flashing	low
red	medium
blue flashing	high
blue	very high