All public logs

Combined display of all available logs of BEASTX Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 14:02, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu A/4/de (Created page with "==Nitro heli== Drehe die Kupplung oder Kurbelwelle des Motors von Hand, so dass der Signalgeber (Magnet o.ä.) den Sensor passiert. Immer wenn der Signalgeber im Erfassungsbereich des Sensors ist, wird die Status LED am MICROBEAST PLUS/ULTRA <font color="#0066FF">'''blau'''</font> aufleuchten.<br /> <br /> Neben der Sensorkontrolle sollte an diesem Einstellpunkt auch gleich die Einstellung für das Gasservo im Fernsteuersender vorgenommen werden (falls noch nicht durchge...")
• 14:01, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu A/3/de (Created page with "==Electric heli== Gib vorsichtig Gas damit sich der Motor dreht und der Phasensensor bzw. der Motorsteller ein Drehzahlsignal ausgibt. Sobald der Motor läuft, sollte die Status LED am MICROBEAST PLUS/ULTRA <font color="#FF3300">'''rot'''</font> aufleuchten.<br /> <br /> Bitte beachte, dass der nutzbare Steuerbereich vom Gas für eine optimale Performance der Regelung entscheidend ist! Üblicherweise wird der Steuerweg des Fernsteuersenders im Motorsteller durch einen in...")
• 14:01, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu A/2/de (Created page with "Bei GOVERNOR MENÜ Punkt A wird geprüft, ob der Drehzahlsensor bzw. das Signalkabel für die Drehzahl korrekt angeschlossen ist und grundsätzlich ein auswertbares Drehzahlsignal anliegt.<br /> <br /> {{WARNING_QUOTE|Achtung! An diesem Einstellpunkt hast Du volle Kontrolle über den Gaskanal, d.h. über den Gaskanal an der Fernsteuerung kann der Motorsteller/das Gasservo am Ausgang [CH5] direkt angesteuert werden.<br /> <br /> '''Achtung! Elektromotoren drehen mit hohen...")
• 13:58, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/8/de (Created page with "==Elektroantrieb mit externem Phasensensor== Verbinde die Leitungen des Phasensensors mit zwei beliebigen Phasen des Elektromotors. Es empfiehlt sich die Leitungen an die Steckkontakte des Motorstellers anzulöten. So ist ein späterer Motorausbau z.B. zu Wartungszwecken einfacher. Bei manchen Phasensensoren ist die Verwendung von einer Messleitung ausreichend. Üblicherweise ist das der Fall, wenn der Motorsteller das System über eine BEC - Stromversorgung vom Antriebs...")
• 13:58, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/10/de (Created page with "==Antrieb mit Verbrennungsmotor== Achte auf polrichtigen Anschluss des Sensors am Adapterkabel BXA76401, da bei Verbrenner-Modellen Sensoren verwendet werden können, die für externe Drehzahlregelsysteme anderer Hersteller konzipiert wurden. Diese haben oft eine spezielle Pinbelegung und die Farben der Anschlusskabel entsprechen u.U. nicht der Norm (beim Align Governor Sensor HE50H22 sind beispielsweise die Kabelfarben vertauscht, hier kennzeichnet rot den Minuspol und...")
• 13:58, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/9/de (Created page with "==Elektroantrieb mit externem Phasensensor== Verbinde die Leitungen des Phasensensors mit zwei beliebigen Phasen des Elektromotors. Es empfiehlt sich die Leitungen an die Steckkontakte des Motorstellers anzulöten. So ist ein späterer Motorausbau z.B. zu Wartungszwecken einfacher. Bei manchen Phasensensoren ist die Verwendung von einer Messleitung ausreichend. Üblicherweise ist das der Fall, wenn der Motorsteller das System über eine BEC - Stromversorgung vom Antriebs...")
• 13:58, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/7/de (Created page with "=Einbau der Hardware= Damit der Drehzahlregler von MICROBEAST PLUS verwendet werden kann, muss das System die Motordrehzahl erfassen können. Dies erfolgt mit einem Drehzahlsensor, der an den Sensoreingang vom MICROBEAST PLUS angesteckt wird. Bei Modellen mit Verbrennungsmotor werden üblicherweise Sensoren verwendet, welche die Drehzahl magnetisch oder optisch ermitteln. Diese Sensoren werden an Kurbelwelle oder Kupplungsglocke montiert und registrieren hier die Anzahl...")
• 13:57, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/2/de (Created page with "{{QUOTE|Bitte beachte, dass die Drehzahlregelung '''nur in Kombination mit einem Summensignal-Empfänger''' verwendet werden kann! Wenn ein Standard-Empfänger verwendet wird, stehen nicht genügend Anschlüsse zur Verfügung.}}<br /> <br />")
• 13:56, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/Page display title/de (Created page with "MICROBEAST PLUS/ULTRA Governor (Drehzahlregler)")
• 13:55, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu A/Page display title/de (Created page with "GOVERNOR MENÜ A - Sensortest")
• 13:55, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu B/Page display title/de (Created page with "GOVERNORMENÜ Punkt B - Untere Gasposition")
• 13:55, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu C/Page display title/de (Created page with "GOVERNOR MENÜ C - Vollgas Position")
• 13:55, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu D/Page display title/de (Created page with "GOVERNORMENÜ D - Sendereinstellung")
• 13:54, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu E/Page display title/de (Created page with "GOVERNORMENÜ E - Teilungsfaktor des Drehzahlsignals")
• 13:54, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu F/Page display title/de (Created page with "GOVERNOR MENÜ F, G & H - Getriebeuntersetzung")
• 13:54, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu F/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_D/de|Manuals:BXFbl:Features/de|GOVMENU|}} __TOC__ <br />")
• 13:54, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu F/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_D/de|Manuals:BXFbl:Features/de|GOVMENU|}} __TOC__ <br />")
• 13:54, 26 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governormenu F for translation
• 13:52, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu E/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_D/de|Manuals:BXFbl:Governormenu_F/de|GOVMENU|}} __TOC__ <br />") Tags: Mobile edit Mobile web edit
• 13:52, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu E/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_D/de|Manuals:BXFbl:Governormenu_F/de|GOVMENU|}} __TOC__ <br />")
• 13:52, 26 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governormenu E for translation
• 13:50, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governor/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Parametermenu/de|Manuals:BXFbl:Governormenu_A/de|GOVMENU|}} __NOTOC__ <br /> =What's a Headspeed Governor?= MICROBEAST PLUS/ULTRA comes with an internal headspeed governor function. This can control the throttle automatically, so that the rotor headspeed of the helicopter stays consistent in flight. I.e. when you add pitch and load the rotor disk, the system will add more throttle in order to prevent from sagging headspeed, when you desc...")
• 13:50, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governor/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Parametermenu/de|Manuals:BXFbl:Governormenu_A/de|GOVMENU|}} __NOTOC__ <br /> =What's a Headspeed Governor?= MICROBEAST PLUS/ULTRA comes with an internal headspeed governor function. This can control the throttle automatically, so that the rotor headspeed of the helicopter stays consistent in flight. I.e. when you add pitch and load the rotor disk, the system will add more throttle in order to prevent from sagging headspeed, when you desc...")
• 13:50, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu A/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governor/de|Manuals:BXFbl:Governormenu_B/de|GOVMENU|}} __TOC__ <br /> =Adjustment on the device=")
• 13:50, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu A/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governor/de|Manuals:BXFbl:Governormenu_B/de|GOVMENU|}} __TOC__ <br /> =Adjustment on the device=")
• 13:49, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu B/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_A/de|Manuals:BXFbl:Governormenu_C/de|GOVMENU|}} __TOC__ <br />")
• 13:49, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu B/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_A/de|Manuals:BXFbl:Governormenu_C/de|GOVMENU|}} __TOC__ <br />")
• 13:49, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu C/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_B/de|Manuals:BXFbl:Governormenu_D/de|GOVMENU|}} __TOC__ <br />")
• 13:49, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu C/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_B/de|Manuals:BXFbl:Governormenu_D/de|GOVMENU|}} __TOC__ <br />")
• 13:48, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu D/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_C/de|Manuals:BXFbl:Governormenu_E/de|GOVMENU|}} __TOC__ <br />") Tags: Mobile edit Mobile web edit
• 13:48, 26 March 2025 Shornstein talk contribs created page Translations:Manuals:BXFbl:Governormenu D/1/de (Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Governormenu_C/de|Manuals:BXFbl:Governormenu_E/de|GOVMENU|}} __TOC__ <br />")
• 13:47, 26 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governormenu D for translation
• 13:47, 26 March 2025 Shornstein talk contribs created page Manuals:BXFbl:Governormenu D (Created page with "<translate> <!--T:1--> {{DISPLAYTITLE:Transmitter setup|noerror}} {{TOC_BXFbl|Manuals:BXFbl:Governormenu_C/en|Manuals:BXFbl:Governormenu_E/en|GOVMENU|}} __TOC__ <br /> Similar to GOVERNOR MENU point A here we will only get status information. At GOVERNOR MENU point D the activation points of the Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Governor function. The information conveyed by the St...")
• 13:43, 26 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governormenu C for translation
• 13:40, 26 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governormenu B for translation
• 13:35, 26 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governormenu A for translation
• 08:25, 25 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governor for translation
• 08:23, 25 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governor for translation
• 08:21, 25 March 2025 Shornstein talk contribs marked Manuals:BXFbl:Governor for translation
• 08:07, 18 October 2024 Shornstein talk contribs created page Translations:Manuals:BXFbl:Receiver B/20/de (Created page with "<!-- Fünftes Bild und Text --> <div class="ios-gallery-item"> <div class="ios-gallery-image"> <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20023.PNG" alt="Screenshot"> </div> <div class="ios-gallery-text">Beim Überspringen wird die Kanalnummer als <b>-</b> angezeigt.</div> </div> </div> </html> <br /> <br />")
• 08:06, 18 October 2024 Shornstein talk contribs created page Translations:Manuals:BXFbl:Receiver B/19/de (Created page with "<!-- Viertes Bild und Text --> <div class="ios-gallery-item"> <div class="ios-gallery-image"> <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20022.PNG" alt="Screenshot"> </div> <div class="ios-gallery-text">Die optionalen Funktionen können übersprungen werden, wenn sie nicht benötigt werden. Siehe Text unten!</div> </div>")
• 08:06, 18 October 2024 Shornstein talk contribs created page Translations:Manuals:BXFbl:Receiver B/18/de (Created page with "<!-- Drittes Bild und Text --> <div class="ios-gallery-item"> <div class="ios-gallery-image"> <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20018.PNG" alt="Screenshot"> </div> <div class="ios-gallery-text">Gehe bei den anderen Funktionen ähnlich vor.</div> </div>")
• 08:06, 18 October 2024 Shornstein talk contribs created page Translations:Manuals:BXFbl:Receiver B/17/de (Created page with "<!-- Zweites Bild und Text --> <div class="ios-gallery-item"> <div class="ios-gallery-image"> <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20017.PNG" alt="Screenshot"> </div> <div class="ios-gallery-text">Bewege zunächst den Pitch-Hebel. Stelle sicher, dass sich nur ein Kanal am Sender bewegt, da das System sonst die Bewegung nicht erkennen kann!</div> </div>")
• 10:09, 16 October 2024 Shornstein talk contribs marked Manuals:BXFbl:Hardware Installation for translation
• 20:33, 21 August 2024 Shornstein talk contribs marked Help:StudioX:HMSoft for translation
• 07:58, 21 August 2024 Shornstein talk contribs created page Translations:Help:StudioX:HMSoft/1/de (Created page with "The BLE2SYS interface is a bluetooth to serial bridge. The newer version 2 uses a HM-18 blueotooth stack from DSD Tech. In rare cases, the devices may not have been reconfigured at the factory for use with the BEASTX system. Usually this is the case when the device name is ''HMSOFT'' instead of ''BLE2SYS'' when searching for the device in StudioX.<br /> <br />")
• 07:58, 21 August 2024 Shornstein talk contribs marked Help:StudioX:HMSoft for translation
• 07:57, 21 August 2024 Shornstein talk contribs created page Help:StudioX:HMSoft/de (Created page with "(Re)Konfiguration des BLE2SYS Moduls")
• 07:57, 21 August 2024 Shornstein talk contribs created page Translations:Help:StudioX:HMSoft/Page display title/de (Created page with "(Re)Konfiguration des BLE2SYS Moduls")
• 07:47, 21 August 2024 Shornstein talk contribs marked Help:StudioX:HMSoft for translation