Translations:Help:FAQ:Helisetup/3/en

Selection in the menus with the rudder control stick does not work.

Maybe there is not enough movement or any movement at all on the rudder channel.

• Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw.
• Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver.
• Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")?
• Serial-wire receiver: Was the rudder channel assigned for rudder function at receiver setup menu?