| 
flat, cover on top, servo connectors showing to rear
| 
flat, cover showing to bottom, servo connectors showing to rear
| 
upright, button on bottom, servo connectors showing to rear
| 
upright, button on top, servo connectors showing to rear
|}
Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter! Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible) and also it is not important whether the system is placed in parallel to the ground or not.
