Translations:Manuals:MBPlusFblV5:ReceiverType/6/en

Default function assignment

Refer to the tables below and identify the column that represents your receiver type. Check whether your radio transmits the channels in the given order respectively each stick function on the radio is transmitted using the specified channel number on the left. To know the channel assignment of your transmitter you can check the user manual of the transmitter or look at the servo monitor of the transmitter. In order to load the preset channel assignment hold down the button for at least 2 seconds and release. The yellow Menu-LED will immediately jump to Menu Point N.

*Channel designation of Spektrum® transmitters:

1	2	3	4	5	6	7	8	9
THROTTLE	AILERON	ELEVATOR	RUDDER	GEAR	AUX1	AUX2	AUX3	AUX4

**AttitudeControl only applicable with MICROBEAST PLUS PROEDITION firmware. When using a different firmware this channel by default controls CH6 Output.