Translations:Manuals:MBPlusFblV5:Setupmenu C/3/en

From BEASTX Wiki
Revision as of 10:36, 30 November 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Adjustment on the device

To select the desired rudder servo pulse width (servo type) move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point C:

Status-LED Rudder servo center pulse length
purple 960
red 760
blue 1520


Note: When you set a different pulse width using the StudioX or StudioXm App the Status LED will be off. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV5:Setupmenu_C/3/en&oldid=12637"