Translations:Manuals:MBPlusFblV5:Setupmenu G/2/en

At SETUP MENU point G you have to choose the electronic mixing type for the swashplate servos or select “no mixing“ for switching off the mixing in case your helicopter has a mechanical swashplate mixer. For the electronic mixer you can choose one of the presets for 90°, 120° and 135°/140° swashplates that are suitable for most helicopters on the market (which kind of CCPM your helicopter uses can be read in the manual for your helicopter). When you're using a multiblade rotorhead that requires to adjust the swash phasing electronically this can be done with the StudioX/StudioXm. Apart from that you can set nearly any other kind of swash mixing and swash geometry with StudioX if required.