Box content and accessories

This is what you get when buying the MICROBEAST PLUS

the MICROBEAST PLUS flybarless unit printed Quickstart manual, Quick reference card and BEASTX sticker set all the wires to connect your receiver to the system (wire length 150mm) 3M gyro pads plastic tool for adjusting the gain dials

Please note: MICROBEAST PLUS is usually sold with BASIC firmware. If you like, you can upgrade to PROEDITION firmware later using the StudioX PC software or StudioXm app. Ask your dealer if you need the PROEDITION firmware upgrade installed already.

This is what you get when buying the MICROBEAST PLUS HD

the MICROBEAST PLUS HD flybarless unit printed Quickstart manual, Quick reference card and BEASTX sticker set all the wires to connect your receiver to the system (wire length 150mm) 3M gyro pads plastic tool for adjusting the gain dials high power connector and on/off switch

Please note: MICROBEAST PLUS HD is usually sold with BASIC firmware. If you like, you can upgrade to PROEDITION firmware later using the StudioX PC software or StudioXm app. Ask your dealer if you need the PROEDITION firmware upgrade installed already.

Optional accessory

USB2SYS

USB2SYS connects your MICROBEAST PLUS / MICROBEAST PLUS HD with your computers USB port. With the StudioX Software (available for Windows and macOS) you can easily configure the system, create backups of your settings, load heli presets, upload firmware update file to your unit and much more.

For more information please see the StudioX manual.

BLE2SYS

BLE2SYS is a Bluetooth Smart Interface that allows to connect your MICROBEAST PLUS / MICROBEAST PLUS HD to your smartphone or tablet. With the StudioXm app (available for Android and iOS) you can easily configure the system, create backups of your settings, load heli presets, upload firmware update file to your unit and much more. Please note that your mobile device must be Bluetooth Smart/Bluetooth LE compatible.

For more information please see the StudioXm manual.