Translations:Manuals:MBUltraFblV5:Receiver B/de/4/en

Default function assignment

Refer to the tables at the bottom and identify the column that represents your receiver type. Check if your radio transmits the channels in the given order, respectively each stick function on the radio is using the specified channel number. To know the channel assignment of your transmitter you can check the user manual of the transmitter or look at the servo monitor of the transmitter. In order to load the preset channel assignment hold down the button for at least 2 seconds and release. The yellow Menu-LED will immediately jump to Menu Point K or one of the following.

Push and hold the button at Menu Point B to load the preset function assignment