Translations:Manuals:MBPlusFblV52:Setupmenu D/3/en
Adjustment on the device
To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color. Please note that depending on the rudder servo center pulse width chosen at Menu Point C, you may not be able to select a frequency higher than 333Hz!
Status-LED | Rudder servo frequency |
---|---|
purple | 50 Hz |
red flashing | 165 Hz |
red | 270 Hz |
blue flashing | 333 Hz |
blue | 560 Hz |
Note: When you set a different frame rate from the StudioX app, the Status LED will be off. You can change back to a preset by tapping the rudder stick as described, but this will remove your custom setting!