Translations:Manuals:BXFbl:Setupmenu overview/20/de

M - Servo Limit

Move thrust/collective stick on the radio to highest position. Carefully push cyclics (roll/aileron and pitch/elevator) to end positions. Check if servos or linkages are binding. If needed, tap or hold rudder stick to adjust limit.

Move thrust/collective stick on the radio to lowest position. Carefully push cyclics (roll/aileron and pitch/elevator) to end positions. Check if servos or linkages are binding. If needed, tap or hold rudder stick to adjust limit.

Again check all possible swashplate positions if there is still any binding and adjust as needed. Please note that limit value will affect all positions. So you must find the position where binding happens first and adjust limit there.