Translations:Manuals:BXFbl:Radio Setup:RemoteSat/25/en

From BEASTX Wiki
Revision as of 18:39, 30 May 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

MICROBEAST ULTRA (v5.9.x)

  • Disconnect(!) the Spektrum® remote satellite and switch on the power supply.
  • During init sequence (LED light H-N is running) push and hold the button for 4 seconds, then release
  • LEDs A and H flash in alternating sequence
  • Now connect your remote satellite to the pin board. The receiver's yellow LED will start to flash in combination with LED A on MICROBEAST
  • Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
  • After successful binding procedure the receiver‘s LED will stay solid
  • Your MICROBEAST will restart and enter RECEIVER MENU. Press button briefly to scan for the receiver and proceed.



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Radio_Setup:RemoteSat/25/en&oldid=23779"