Translations:Manuals:BXFbl:Setupmenu I/18/en

2. Now adjust the internal control direction of the BEASTX gyro: When you push elevator/pitch forwards, the Status LED must light or flash in blue color and you should see the label forwards getting blue as well. When you pull elevator/pitch backwards, the Status LED must light or flash in red color and you should see the label backwards getting red as well.

When you move aileron/roll to the right, the Status LED must light or flash in blue color. When you move aileron/roll to the left, the Status LED must light or flash in red color.

When the display is inverted (red = right or forwards and blue = left or backwards) reverse the internal control direction by choosing one of the four buttons below the direction label.