Translations:Manuals:BXFbl:Setupmenu K/3/en

Adjustment on the device

Initially the Status LED will be off, the swashplate will be leveled and rotorblades will have 0 degrees of pitch. Attach your pitch gauge to the rotorblade or blade grip, calibrate it to 0.0 degrees and then tap the rudder stick once. This will move the rotorblades into control position. Now check the pitch gauge. We want to see exactly +-6.0 degrees. By aileron/roll input, you can increase/decrease the amount of cyclic pitch (left = decrease, right = increase). Do this until you have reached +-6.0 degrees (the sign/direction of pitch is not of importance). You can switch back and forth between control postion and center position as often as you like. When done, tap the button to proceed to the next menu point.