Translations:Manuals:BXFbl:Receiver M/8/en

ESC connections

In the following we will only mention connections to MICROBEAST PLUS and MICROBEAST PLUS / ULTRA. Due to the fact, that there are not much micro-sized ESCs available with telemetry output, we won't go into detail here as it's rarely needed. Basically you can also use telemetry with NANOBEAST if you've installed a firmware with telemetry support on that device. Here the telemetry signal will be connected to the [SAT] port in any configuration. Setup procedure is similar to MICROBEAST PLUS / ULTRA.