Translations:Manuals:BXFbl:Receiver M/10/en

From BEASTX Wiki
Revision as of 11:58, 5 July 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


  • There are some Hobbywing® Platinum models (i. e. Platinum "LV" series) that do not measure current. Here current and consumed capacity will stay "0.00". However, you can use the displayed battery voltage to estimate the maximum flight time of the model and to effectively prevent a deep discharge of the battery, i. e. by setting a low voltage alarm in your radio.
  • Additionally some ESC do not measure temperature, so Temperature will stay at 0 degrees in your telemetry display. It's no malfunction, there simply is no value available.
  • Hobbywing® Platinum V3 ESC don't supply any telemetry output. Anyhow, you can connect the motor speed cable as shown above to MICROBEAST PLUS / ULTRA. Then you can display motor speed/headspeed on your radio at least!



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Receiver_M/10/en&oldid=24990"