Translations:Manuals:BXFbl:Parametermenu/3/en

Adjustment at the device

When the BEASTX System is ready for operation, hold down the button until the Menu LED next to point A flashes quickly, then release the button immediately. The flashing Menu LED A shows that you've entered menu point A of PARAMETER MENU. To skip to the setting you want to adjust, repeatedly press the button until the corresponding Menu LED flashes. The current setting of this menu point is shown by the color and state of the Status-LED. Tapping the rudder stick left/right decreases/increases the value. If you don't like one of the presets, you can edit each setting to your liking with the StudioX Flow app. In this case, if your custom setting does not match any preset, the Status-LED will stay off. You can still choose one of the presets by tapping the rudder stick, but this will erase your custom setting.

When using the Bank Switching feature (only with PROEDITION firmware), you can only change the settings for bank 1 using the LED menu of the device. The parameters for banks 2 and 3 must be set in the StudioX Flow app. When disabling bank switching, the settings will not change, as bank 1 is used by default!