Changes

If the COM-Port, to which the USB2SYS-Interface has been assigned by windows, is known you can directly choose it from the list of available interfaces:

If the COM-Port, to which the USB2SYS-Interface has been assigned by windows, is known you can directly choose it from the list of available interfaces:

Klicken Sie auf die Grafik für eine größere Ansicht  Name: Step 5_1.png Hits: 753  Größe: 96,0 KB  ID: 599

 

[[File:Step 5_1.png|500px]]

If the COM-Port is not known you can use the "Autodetect…" function:

If the COM-Port is not known you can use the "Autodetect…" function:

Klicken Sie auf die Grafik für eine größere Ansicht  Name: Step 5_2.jpg  Hits: 441  Größe: 38,7 KB  ID: 600

 

Klicken Sie auf die Grafik für eine größere Ansicht  Name: Step 5_3.jpg  Hits: 471  Größe: 42,9 KB  ID: 601

[[File:Step 5_2.png|500px]]

 

[[File:Step 5_3.png|500px]]

When the dialog is shown, disconnect the USB2SYS-Interface from the PC (if already connected) and reconnect it again.

When the dialog is shown, disconnect the USB2SYS-Interface from the PC (if already connected) and reconnect it again.