Changes

'''1. Connecting to the MICROBEAST/AR7xxxBX unit'''

'''1. Connecting to the MICROBEAST/AR7xxxBX unit'''

  The MICROBEAST will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source

  Das MICROBEAST wird NICHT vom USB2SYS-Interface mit Strom versorgt, daher muss das MICROBEAST mit Strom versorgt werden

  before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).

  bevor (!) es mit dem PC verbunden wird z.B. über die Empfängerstromversorgung des Modells (Motorregler, Empfängerakku).

The cable from the interface goes into the MICROBEAST's '''[SYS]''' port. Watch out for correct polarity on both devices.<br />

The cable from the interface goes into the MICROBEAST's '''[SYS]''' port. Watch out for correct polarity on both devices.<br />