7,261
edits
Changes
Jump to navigation
Jump to search
Line 3:
Line 3: − − <br /> − '''1. Driver installation''' Line 13:
Line 10: − − '''2. Validate driver installation''' − − After successful installation of the driver, when the USB2SYS-Interface is connected to the PC, you must be able to find following entry in the Windwos Device Manager: − − [[File:Step 4.png|200px|thumb|none]] − − <br /> − The name COM3 may be different on your PC. This entry must disappear when you disconnect the USB2SYS-Interface from the PC, and reappear when you connect it again. − − To access the device manager under windows 7 type devmgmt.msc in the Startmenu's search bar. Alternatively you can enter the computer properties by pressing and holding the START key on the keyboard and addtionaly pressing the PAUSE key. Then click on device manager in the upper left corner of the appearing window. −
Importing a new version from external source
The StudioX software bundle includes the old MICROBEAST update tool which is now called "BEASTX Updater Classic". You can use this tool especially if you encounter problems when using the StudioX application and want to check if your device can be recognized or simply if you want to do a quick firmware update to one of your units or just because you did like to use this old tool. You can find the BEASTX Updater Classic in the BEASTX programm group in your Windows START menu.
The StudioX software bundle includes the old MICROBEAST update tool which is now called "BEASTX Updater Classic". You can use this tool especially if you encounter problems when using the StudioX application and want to check if your device can be recognized or simply if you want to do a quick firmware update to one of your units or just because you did like to use this old tool. You can find the BEASTX Updater Classic in the BEASTX programm group in your Windows START menu.
[[File:Updater classic link.jpg|200px|thumb|none]]
[[File:Updater classic link.jpg|200px|thumb|none]]
If not already done make sure that the driver files for your USB2SYS interface have been installed. The driver installation will not be launched automatically during setup.
If not already done make sure that the driver files for your USB2SYS interface have been installed. The driver installation will not be launched automatically during setup.
Do not connect the USB2SYS interface to the computer unless you did not perform the driver installation. After the installation when you connect the interface to the PC, Windows will recognize the device and install it as a new device.<br />
Do not connect the USB2SYS interface to the computer unless you did not perform the driver installation. After the installation when you connect the interface to the PC, Windows will recognize the device and install it as a new device.<br />
<br />
<br />
'''3. Start BEASTXUpdater'''
'''3. Start BEASTXUpdater'''