translate-proofr
18
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − <languages /><br />+ + Line 34:
Line 35: − + − Here you can adjust the maximum charging of the swashplate heading hold memory. This influences the dynamic of the control loop.+ − − + − + − Line 53:
Line 52: + +
no edit summary
__TOC__
<br />
==Swashplate gyro setup==
==Swashplate gyro setup==
===Parameter menu Point C===
===Parameter menu Point C===
This setting influences the dynamic of the control loop.
<br />
Fly fast forward and give jerky pitch inputs up and down. The heli should rise and descent in a elevator like manner. If its nose pitches up and down you should rise the adjustment at parameter menu Point C.
Fly fast forward and give jerky pitch inputs up and down. The heli should rise and descent in a elevator like manner. If its nose pitches up and down you should rise the adjustment at parameter menu Point C.
If the adjustment's too high, again the heli will feel very sluggish and "synthetic". For me on most helis the best setup was red or blue blinking. When the LED is blue in most cases the heli will feel some kind of strange.. try it out yourself, this adjustment is not critical.
If the adjustment's too high, again the heli will feel very sluggish and "synthetic". For me on most helis the best setup was red or blue blinking. When the LED is blue in most cases the heli will feel some kind of strange.. try it out yourself, this adjustment is not critical.
<br />
If this pitching up behavior can not be suppressed go back to the beginning. Maybe the swashplate gain is too low or the direct gain is too high.
If this pitching up behavior can not be suppressed go back to the beginning. Maybe the swashplate gain is too low or the direct gain is too high.
<br />
When it's absolutely not possible to suppress the wobbling/oscillating it seems your heli is mechanically inappropriate. The servos could be too slow, the head geometry not correct, rotorblades have to much forerun, the head dampening is hard, head speed is too low, also try mounting the Microbeast unit with a harder pad ....
When it's absolutely not possible to suppress the wobbling/oscillating it seems your heli is mechanically inappropriate. The servos could be too slow, the head geometry not correct, rotorblades have to much forerun, the head dampening is hard, head speed is too low, also try mounting the Microbeast unit with a harder pad ....
If you don't like the given presets switch to LED blue and adjust Expo yourself in your radio. Also the rotation rate in blue is nearly set to maximum and can be adjusted by Dualrate/servotravel in your radio. So 100% stick deflection is similar to round about 400 deg/s rotationrate. If your heli seems not to rotate this fast and also rising the servotravel beyond 100% doesn't change anything it is likely that your heli is mechanically not able to make faster rotations. Make sure that in Setup menu Point L the cyclic deflection is set to absolute possible maximum. You should have at least 10 - 14 deg of cyclic pitch there. This adjustment does not directly affect the rotation rate, but if you've reduced here too much the system is not able to go beyond the set deflection and so can not provide more rotation rate.
If you don't like the given presets switch to LED blue and adjust Expo yourself in your radio. Also the rotation rate in blue is nearly set to maximum and can be adjusted by Dualrate/servotravel in your radio. So 100% stick deflection is similar to round about 400 deg/s rotationrate. If your heli seems not to rotate this fast and also rising the servotravel beyond 100% doesn't change anything it is likely that your heli is mechanically not able to make faster rotations. Make sure that in Setup menu Point L the cyclic deflection is set to absolute possible maximum. You should have at least 10 - 14 deg of cyclic pitch there. This adjustment does not directly affect the rotation rate, but if you've reduced here too much the system is not able to go beyond the set deflection and so can not provide more rotation rate.
<br />
==Rudder gyro setup==
==Rudder gyro setup==
<br />
'''Important:''' Tail setup has to be done in order. Don't try to tweak the tail stopping behaviour with dial 3 or play with the heading lock
'''Important:''' Tail setup has to be done in order. Don't try to tweak the tail stopping behaviour with dial 3 or play with the heading lock