Last modified on 4 October 2017, at 05:28

Helicopter presets for BEASTX flybarless devices

Revision as of 05:28, 4 October 2017 by FuzzyBot (Talk | contribs) (Importing a new version from external source)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Horizon Hobby BLADE 270CFX

HORIZON-Blade-270-CFX.JPG
The BLADE 270CFX helicopter comes was a factory preinstalled OEM version of the AR7210BX flybarless receiver. This device is fully configured so the helicopter comes as "ReadyToFly" r/c model. The basic setup is not modifiable but you can update these devices to the standard AR7210BX firmware if you need to. In exchange you will loose rescue bail out option as well as factory preset. Here you can see the preset of the basic settings in case you've lost your settings or if you want to use a standard AR7210BX or MICROBEAST PLUS with this helicopter. Anyhow, note that you will have to readjust collective pitch, servo throws, limits and center positions as these are not adjustable with the StudioX software! For this refer to the manual for Setup menu Steps E, G, J, K and L.


SPEKTRUM AR7210BX - Firmware Version 4.2.0:

Blade270 Setup EN.PNG

Blade270 Params EN.PNG
Please note: SAFE© feature is only accessible when using the ProEdition firmware!