Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Line 319:
Line 319: − − {{QUOTE|'''Firmware Version 4.0.0 or lower:''' − * When using a standard receiver you must go into receiver menu once, select "Standard receiver" as type at menu point A (if not done already) and then confirm the type selection by briefly pressing the button. If you don't do this the assignment gyro channel<->AttitudeControl is not set and you won't be able to switch AttitudeControl on and off! − * Please note that after adjusting the receiver setup menu for safety reason AttitudeControl (and also the RPM Governor function) will be reset to default. So after doing the adjustment in receiver menu, select your desired AttitudeControl mode a Parameter menu point L again. Otherwise it will still not work.}}<br />
no edit summary
Obviously your device doesn't seem to have the firmware with AttitudeControl feature installed. You can check this by connecting your MICORBEAST PLUS / MICROBEAST PLUS HD to the computer using the USB2SYS interface. In StudioX you can see on the device overview page which features are installed on the device. Use StudioX to upgrade to a firmware that contains AttitudeControl feature if necessary.<br />
Obviously your device doesn't seem to have the firmware with AttitudeControl feature installed. You can check this by connecting your MICORBEAST PLUS / MICROBEAST PLUS HD to the computer using the USB2SYS interface. In StudioX you can see on the device overview page which features are installed on the device. Use StudioX to upgrade to a firmware that contains AttitudeControl feature if necessary.<br />
<br />
<br />
===AttitudeControl can not be activated although it is switched on at Parameter menu point L=== <!--T:76-->
===AttitudeControl can not be activated although it is switched on at Parameter menu point L=== <!--T:76-->