Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Line 93:
Line 93: − + − The rotation speed on all 3 axis is mostly limited by the capability of the sensors. This is appr. 600deg/s. Practically even less as due to calibration you loose some deg.
Created page with "===Der Heli rollt nicht schnell genug über die zyklischen Drehachsen.==="
dies nur durch aus- und einschalten der Stromversorgung behoben werden kann.
dies nur durch aus- und einschalten der Stromversorgung behoben werden kann.
===How can I increase rotation rate for aileron, elevator and rudder?===
===Der Heli rollt nicht schnell genug über die zyklischen Drehachsen.===
The roation speed is only determined by the length of the stick signal (and especially has nothing to do with your cyclic pitch adjustment at setup points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground!). So increasing/decreasing the stick throw, mostly done by increasing/decreasing servo throw or using Dualrate in the TX for the specified function, will increase/decrease roation rate.
The roation speed is only determined by the length of the stick signal (and especially has nothing to do with your cyclic pitch adjustment at setup points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground!). So increasing/decreasing the stick throw, mostly done by increasing/decreasing servo throw or using Dualrate in the TX for the specified function, will increase/decrease roation rate.