7,241
edits
Changes
Jump to navigation
Jump to search
Line 189:
Line 189: + + + +
Importing a new version from external source
Anyhow, the color is not a fixed value that is a must to reach. If you get blue you have something similar to 80% usable servo throw. The further you can go the higher the value will be. So everything from blue upwards will give a good resolution and you won't feel any disadvantages. If using good, precise high class servos, strong and with fast speed you even can fly with only red LED without any noticeable difference. Also rotorblades (flybarless blades or not) can make a difference.
Anyhow, the color is not a fixed value that is a must to reach. If you get blue you have something similar to 80% usable servo throw. The further you can go the higher the value will be. So everything from blue upwards will give a good resolution and you won't feel any disadvantages. If using good, precise high class servos, strong and with fast speed you even can fly with only red LED without any noticeable difference. Also rotorblades (flybarless blades or not) can make a difference.
On a 250 or 450 size heli you should try to get "dark blue" at exactly 6.0° as here servos normally are not so precise.<br />
On a 250 or 450 size heli you should try to get "dark blue" at exactly 6.0° as here servos normally are not so precise.<br />
<br />
===Setup menu point N - Adjusting pirouette optimization is not accessible anymore or testmode does not work===
With firmware version 4.x.x you have to choose the exact mounting direction of the device at Setup menu point A. So we can directly determine the necessary direction for pirouette optimization. Manual adjustment is not necessary anymore and therefore it was removed from Setup menu point N. Instead menu point N now serves to enable the internal Headspeed Governor (but only in combination with a single line receiver/remote satellite!). Please carefully read the manual for your firmware version and especially make sure you've set menu point A correctly!<br />
<br />
<br />