Changes

''I'm using firmware 3.2.0 (or greater) which is stated to support Spektrum SRXL/XPLus serial wire signal but MICROBEAST PLUS does not recognize my AR9020 receiver at receiver menu point B (Status LED stays red).''

''I'm using firmware 3.2.0 (or greater) which is stated to support Spektrum SRXL/XPLus serial wire signal but MICROBEAST PLUS does not recognize my AR9020 receiver at receiver menu point B (Status LED stays red).''

Unfortunately the communication protocol of the AR9020 receiver is not fully compatible to the SRXL specification. We can provide a MICROBEAST PLUS firmware with modified Spektrum SRXL protocol so that the AR9020 receiver's SRXL output can be used anyway. You can request the firmware at our [mailto:service@beastx.com service center]. When using this firmware it is not possible to use receivers from Multiplex-RC with SRXL V2 signal output, neither is it possible to use Spektrum receivers that are compliant with SRXL standards. Otherwise this modified firmware does not differ from the default firmware.<br /> <br />

Unfortunately the communication protocol of the AR9020 receiver is not fully compatible to the SRXL specification. We can provide a MICROBEAST PLUS firmware with modified Spektrum SRXL protocol so that the AR9020 receiver's SRXL output can be used anyway. You can request the firmware at our [mailto:service@beastx.com service center]. When using this firmware it is not possible to use receivers from Multiplex-RC with SRXL V2 signal output, neither is it possible to use Spektrum receivers that are compliant with SRXL standards. Otherwise this modified firmware does not differ from the default firmware.<br />

<br />

==Setup menu==

==Setup menu==