Changes

===MICROBEAST does not finish initialization. What can I do?===

===MICROBEAST does not finish initialization. What can I do?===

Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are beeing calibrated, H - N show determining the RC channels and their center positions. Initially the chase is from A - N. If one step is done the indication light for this step will quit running.

Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are beeing calibrated, H - N show determining the RC channels and their center positions.

MICROBEAST/AR7x00BX: Initially the chase is from A - N. If one step is done the indication light for this step will quit running.

MICROBEAST PLUS: Initially the chase is from H - N (Stick calibration). Only if this step is finished the chase from A - G (Sensor calibration) will start.

When LEDs A - G do not quit running

When LEDs A - G do not quit running