Changes

===Which servos can be used with MICROBEAST PLUS===

===Which servos can be used with MICROBEAST PLUS===

A rule of thumb to find well suited servos for you flybarless helicopter: '''As strong as necessary, as fast as possible, with less deadband as avilable'''<br />

A rule of thumb to find well suited servos for you flybarless helicopter: '''As strong as necessary, as fast as possible, with less deadband as available.'''<br />

<br />

<br />

Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45°. The faster the better. In addition the servo should be very precise, have little gear backlash and a low deadband. And of course it should be a digital servo that supports high frame rates (200Hz or more). Also using special heli servos which are designed for maximum vibration resistance is a good choice.<br />

Servo torque in kg/cm should be at least 3-4 times the heli weight (in kilogram). Speed should be at least 0.1s/45°. The faster the better. In addition the servo should be very precise, have little gear backlash and a low deadband. And of course it should be a digital servo that supports high frame rates (200Hz or more). Also using special heli servos which are designed for maximum vibration resistance is a good choice.<br />

<br />

<br />

Note that all the speed is useless if the torque is not enough. In doubt when two servos of a series are only slightly different in speed and torque, normaly the more powerful is in advantage.<br />

Note that all the speed is useless if the torque is not enough. In doubt when two servos of a series are only slightly different in speed and torque, normaly the more powerful is in advantage.<br />