Changes

<br />

<br />

==MICROBEAST vs. MICROBEAST PLUS== <!--T:7-->

=MICROBEAST vs. MICROBEAST PLUS= <!--T:7-->

MICROBEAST was the first product of BEASTX company. It is a flybarless unit that can be programmed without the need for a computer or external programming device. Its unique EasySetup makes it possible to program the system within a few minutes just by using the button on the unit and your transmitter. There are not many parameters to adjust as MICROBEAST can be used with nearly any RC helicopter model "out of the box".<br />

MICROBEAST was the first product of BEASTX company. It is a flybarless unit that can be programmed without the need for a computer or external programming device. Its unique EasySetup makes it possible to program the system within a few minutes just by using the button on the unit and your transmitter. There are not many parameters to adjust as MICROBEAST can be used with nearly any RC helicopter model "out of the box".<br />

<br />

<br />

|}

|}

MICROBEAST PLUS is the successor of MICROBEAST and comes with new hardware components like more powerful microcontroller and more accurate gyro sensors. Due to these new capabilities MICROBEAST PLUS can be upgraded with lots of additional features like an artificial horizon for controlling the attitude (used for Bailout rescue, flight training and angular mode), a governor function for controlling the rotor headspeed of the helicopter as well as a Bank switch feature for adding several parameter sets to serve different flight conditions.<br />

MICROBEAST PLUS is the successor of MICROBEAST and comes with new hardware components like more powerful microcontroller and more accurate gyro sensors. Due to these new capabilities MICROBEAST PLUS can be upgraded with lots of additional features like an artificial horizon for controlling the attitude (used for Bailout rescue, flight training and angular mode), a governor function for controlling the rotor headspeed of the helicopter as well as a Bank switch feature for adding several parameter sets to serve different flight conditions.<br />

<br />

<br />

==MICROBEAST PLUS vs. MICROBEAST PLUS HD== <!--T:2-->

=MICROBEAST PLUS vs. MICROBEAST PLUS HD= <!--T:2-->

''I intend to use the MICROBEAST PLUS on my 600/700 heli. Should I go with the HD version? What's the difference?''<br />

''I intend to use the MICROBEAST PLUS on my 600/700 heli. Should I go with the HD version? What's the difference?''<br />

<br />

<br />

<br />

<br />

{{QUOTE|In regards to software and functionality in general there is no difference between MICROBEAST PLUS and MICROBEAST PLUS HD! Both use the same firmware and you can buy and upgrade both devices to ProEdition firmware.}}

{{QUOTE|In regards to software and functionality in general there is no difference between MICROBEAST PLUS and MICROBEAST PLUS HD! Both use the same firmware and you can buy and upgrade both devices to ProEdition firmware.}}

<br />

<br />

==MICROBEAST PLUS from ALIGN== <!--T:8-->

=MICROBEAST PLUS from ALIGN= <!--T:8-->

MICROBEAST PLUS devices included in ALIGN T-Rex kits come with Firmware Version 4.x.x or 5.x.x '''BASIC'''. You can upgrade/update/register and use these devices just like any other MICROBEAST PLUS. Only difference is that these devices are carrying the ALIGN logo on the housing.

MICROBEAST PLUS devices included in ALIGN T-Rex kits come with Firmware Version 4.x.x or 5.x.x '''BASIC'''. You can upgrade/update/register and use these devices just like any other MICROBEAST PLUS. Only difference is that these devices are carrying the ALIGN logo on the housing.

{|style="margin-left: 10px;"

{|style="margin-left: 10px;"

|[[File:Align_MBPlus.png|none|x120px]]

|[[File:Align_MBPlus.png|none|x120px]]

|}<br />

|}<br />

<br />

<br />

==Can I use MICROBEAST PLUS with a gasser heli, especially with RPM Governor and AttitudeControl?== <!--T:3-->

=Can I use MICROBEAST PLUS with a gasser heli, especially with RPM Governor and AttitudeControl?= <!--T:3-->

We did do several tests with gas powered helis and we do not see any restriction on this. Gas motors produce very low frequent vibrations which normally can be filtered by the gyro sensors very well. So you should be able to fly with MICROBEAST PLUS and use AttitudeControl without issues on gasser helis. Also the RPM Governor function can be used with gas motors. Only restriction is that a rpm sensor with digital sensor output (PWM) must be used for proper function. Analog sensors like the Futaba GV1 magnet sensor or StatorGator which are often installed on gasser helis can't be used.<br />

We did do several tests with gas powered helis and we do not see any restriction on this. Gas motors produce very low frequent vibrations which normally can be filtered by the gyro sensors very well. So you should be able to fly with MICROBEAST PLUS and use AttitudeControl without issues on gasser helis. Also the RPM Governor function can be used with gas motors. Only restriction is that a rpm sensor with digital sensor output (PWM) must be used for proper function. Analog sensors like the Futaba GV1 magnet sensor or StatorGator which are often installed on gasser helis can't be used.<br />

<br />

<br />

|JR GSR260Z Sports FBL<br />with MICROBEAST PLUS HD

|JR GSR260Z Sports FBL<br />with MICROBEAST PLUS HD

|}

|}

<br />

<br />

==Is it possible to connect 4 swash plate servos to MICROBEAST / MICROBEAST PLUS?== <!--T:4-->

=Is it possible to connect 4 swash plate servos to MICROBEAST / MICROBEAST PLUS?= <!--T:4-->

'''Firmware Version 4.x.x and lower:''' No, 3 swashplate servos only.<br />

'''Firmware Version 4.x.x and lower:''' No, 3 swashplate servos only.<br />

<br />

<br />

'''Firmware Version 5.x.x:''' Yes, you can use up to 4 swash servos when using a single line receiver, i.e. for large scale helicopters. In this case we recommend to connect the servo outputs to a separate power distribution system. The 4th servo (2nd elevator servo) is connected to CH7 output of the MICROBEAST PLUS (only signal out!). See manual for further informations.<br />

'''Firmware Version 5.x.x:''' Yes, you can use up to 4 swash servos when using a single line receiver, i.e. for large scale helicopters. In this case we recommend to connect the servo outputs to a separate power distribution system. The 4th servo (2nd elevator servo) is connected to CH7 output of the MICROBEAST PLUS (only signal out!). See manual for further informations.<br />

<br />

<br />

==Differences between firmware versions (changelog)== <!--T:5-->

=Differences between firmware versions (changelog)= <!--T:5-->

Here you can see what has changed from one version to the preceeding version.<br />

Here you can see what has changed from one version to the preceeding version.<br />

<br />

<br />

===MICROBEAST PLUS=== <!--T:9-->

==MICROBEAST PLUS== <!--T:9-->

<br />

<br />

{{WARNING_QUOTE|When updating from firmware 4.x.x or lower to Version 5.x.x you will loose all your settings. Please carefully read the Version 5 instruction manual and do the basic setup again.}}<br />

{{WARNING_QUOTE|When updating from firmware 4.x.x or lower to Version 5.x.x you will loose all your settings. Please carefully read the Version 5 instruction manual and do the basic setup again.}}<br />

<br />

<br />

===MICROBEAST and TSA Trajectory=== <!--T:11-->

==MICROBEAST and TSA Trajectory== <!--T:11-->

'''3.0.12'''

'''3.0.12'''

* Supports Graupner HOTT SUMD serial line signal (SRXL HOTT)

* Supports Graupner HOTT SUMD serial line signal (SRXL HOTT)

<br />

<br />

<br />

<br />

===SPEKTRUM AR7200BX and AR7300BX=== <!--T:13-->

=My MICROBEAST / MICROBEAST PLUS is defective, where can I send it?=

'''4.0.14'''

When you have an ALIGN branded device you could ask your ALIGN dealer for service or replacement. Other than that please ask your local BEASTX distributor for your country. Usually the distributors will replace your device, collect some more defective devices and then get new devices from us in exchange. Another option is to send the device directly to our service center in Germany, but when living outside Europe this can take a long time, as the parcels usually go to customs authorities first. When sending to the service center use [http://www.freakware.de/rma/rma-eng.pdf this RMA form], you will also find the shipping address there.<br />

* RPM Governor feature for nitro and gas engines<br />

<br />

<br />

<br />

<br />

</translate>

</translate>