Line 63: |
Line 63: |
| * added support for FlySky iBus and Jeti EXBUS serial line input data | | * added support for FlySky iBus and Jeti EXBUS serial line input data |
| * Spektrum/JR remote satellite can be directly connected to pin board of MICROBEAST PLUS (Spektrum Adapter not required anymore); see manual for further information | | * Spektrum/JR remote satellite can be directly connected to pin board of MICROBEAST PLUS (Spektrum Adapter not required anymore); see manual for further information |
| + | * added separate trim values for aileron, elevator, collective and rudder |
| * removed "User defined" presets instead you can directly edit a value with StudioX/StudioXm if necessary | | * removed "User defined" presets instead you can directly edit a value with StudioX/StudioXm if necessary |
| * reworked adjustment in Receiver Menu: | | * reworked adjustment in Receiver Menu: |
Line 77: |
Line 78: |
| ** Setup Menu Point M (Cyclic directions): no need to check swash gyro compensation by user anymore, instead teach the stick directions to the system; see manual for further information | | ** Setup Menu Point M (Cyclic directions): no need to check swash gyro compensation by user anymore, instead teach the stick directions to the system; see manual for further information |
| * reworked settings in Parameter Menu: | | * reworked settings in Parameter Menu: |
− | ** Parameter Menu Point A (Quick trim): added collective trimming and rudder trim can be done with rudder stick now; see manual for further information | + | ** Parameter Menu Point A (Quick trim): added collective trim and rudder trim can be done with rudder stick now; see manual for further information |
| ** Parameter Menu Point L (AttitudeControl Mode): swapped LED colors for different modes (now purple = Angular mode, red = Bailout rescue, blue = 3D - Mode) | | ** Parameter Menu Point L (AttitudeControl Mode): swapped LED colors for different modes (now purple = Angular mode, red = Bailout rescue, blue = 3D - Mode) |
| * throttle failsafe indicator (only when using Single line receiver): when throttle is higher than failsafe position and failsafe engages during power up, the system will lock throttle after initialization and the Status LED will flash red/blue! | | * throttle failsafe indicator (only when using Single line receiver): when throttle is higher than failsafe position and failsafe engages during power up, the system will lock throttle after initialization and the Status LED will flash red/blue! |