7,241
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: − + − + − ''I connect the USB2SYS/SPMA3030 inteface to my MICROBEAST / AR7xxxBX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br /> − +
Importing a new version from external source
===StudioX does not recognize my device===
===StudioX does not recognize my device===
''I start the StudioX software and connect my BEASTX device to the computer but nothing happens.''
''I start the StudioX software and connect my BEASTX device to the computer but nothing happens.''
* Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and make sure that the device is powered in case it is not powered from the USB interface (this is only the case with the RX2SIM interface).
* Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and '''make sure that the device is powered from a receiver battery or BEC''' (only when using the RX2SIM interface the BEASTX device can be powered from the USB port!).
* On computers with Microsoft Windows operating system make sure the driver files for the USB2SYS / SPMA3030 / RX2SIM interface has been installed as described [[USB2SYS/SPMA3030_driver_installation/en|here]].
* On computers with Microsoft Windows operating system make sure the driver files for the USB2SYS / SPMA3030 / RX2SIM interface has been installed as described [[USB2SYS/SPMA3030_driver_installation/en|here]].
* Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry) as described [[StudioX_Microbeast_Plugin/en#Advanced_plugin_configuration|here]] for example.<br />
* Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry) as described [[StudioX_Microbeast_Plugin/en#Advanced_plugin_configuration|here]].<br />
<br />
<br />
<p>
<p>
When the blue LED lights up the connection wire is plugged in with wrong polarity! Usually the light on the interface flashes sporadically when data is transferred between computer and BEASTX device but it mustn't light up continuously.</p><br />
'''When the blue LED lights up solid on the USB2SYS/SPMA3030 the connection wire is plugged in with wrong polarity!''' Usually the light on the interface flashes periodically when data is transferred between computer and BEASTX device, but it mustn't light up continuously.</p><br />
===I get the message that my device is not supported by StudioX. What can I do?===
===I get the message that my device is not supported by StudioX. What can I do?===