MICROBEAST PLUS RPM Governor - How to setup a Castle Creations ESC

From BEASTX Wiki
Revision as of 15:01, 27 January 2015 by Shornstein (talk | contribs) (Created page with "The RPM Governor function of MICROBEAST PLUS firmware version 4.0.0 does work very well with Castle Creations ESCs. The Castle Creations Phoenix EDGE series provide a separate...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The RPM Governor function of MICROBEAST PLUS firmware version 4.0.0 does work very well with Castle Creations ESCs. The Castle Creations Phoenix EDGE series provide a separate rpm signal output, so despite the firmware with governor function there is nothing else needed to connect your ESC to MICROBEAST PLUS. When using a Castle Talon, ICE, ICE2 or similar ESC you additionally need to buy a rpm phase sensor like the BEASTX phase sensor BXA76013 so that MICROBEAST PLUS can detect the motor speed/rotor head speed of your helicopter. To connect and supply the rpm sensor with power you will also need the sensor adapter BX76401.

The Castle Creations ESC offer a special "External Governor Mode" to be used with flybarless systems. Anyhow, this mode has an integrated soft start and autorotation bailout function. Therfore we do NOT recommend to use this mode, as MICROBEAST PLUS can do this on its own! Instead we suggest to setup the Castle ESC to a very simple throttle control mode which is offered by using the "Fixed wing airplane" mode in combination with "Very fast" throttle response.

Retrieved from "https://wiki.beastx.com/index.php?title=MICROBEAST_PLUS_RPM_Governor_-_How_to_setup_a_Castle_Creations_ESC&oldid=3331"