Bureaucrats, Administrators, translate-proofr
15,484
edits
Changes
Jump to navigation
Jump to search
Line 134:
Line 134: + Line 139:
Line 140: − |soft Line 155:
Line 155: + +
no edit summary
<br />
<br />
{{TABLEV5|Throttle response
{{TABLEV5|Throttle response
|soft
|normal
|normal
|slightly increased
|slightly increased
|aggressive
|aggressive
|very aggressive
|very aggressive
}}<br />
}}<br />
<br />
<br />
<br />
<br />
With the StudioX software/StudioXm App you have the option to disable the softstart feature, which will set the spool up rate to "0". This is necessary when using a speed controler with built-in softstart feature (but without headspeed governing!). In this case the system will add half throttle immediately and wait until the speed controler has finished the spool up. Then it will activate the governing.<br />
With the StudioX software/StudioXm App you have the option to disable the softstart feature, which will set the spool up rate to "0". This is necessary when using a speed controler with built-in softstart feature (but without headspeed governing!). In this case the system will add half throttle immediately and wait until the speed controler has finished the spool up. Then it will activate the governing.<br />
<br />
{{WARNING_QUOTE|Please note that you can't set a speed lower than 50 rps with StudioX because of the fact noted above. Setting the speed below 50 will be the same as setting it to 0, so it will disable the soft start!}}<br />
<br />
<br />