SETUP MENU A - Device orientation

The AR7210BX receiver can be mounted in nearly all possible orientations. The only restriction is that the servo connection terminal has to point in or against flying direction and the egdes of the unit must be aligned in parallel to the rotation axis.

Status LED off	Status LED purple flashing	Status LED purple	Status LED red flashing
Status LED red	Status LED blue flashing	Status LED blue	Status LED red/blue

Dear customer, please note that this manual is still under construction! The pictures above show the MICROBEAST PLUS but the device orientation and layout of AR7210BX is similar!

Adjustment at the device

Select the orientation that the device is actually mounted on your heli by choosing the suitable Status LED color shown at SETUP MENU point A. You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.

Status-LED	Device orientation
off	flat, sticker on top side, socket points in flight direction
purple flashing	vertical, button is on the top, socket points in flight direction
purple	flat inverted, sticker on bottom side, socket points in flight direction
red flashing	vertical inverted, button is on the bottom, socket points in flight direction
red	flat, sticker on top side, socket points to the tail boom
blue flashing	vertical, button is on the top, socket points to the tail boom
blue	flat inverted, sticker on bottom side, socket points to the tail boom
red/blue	vertical inverted, button is on the bottom, socket points to the tail boom

Setup with StudioXm

Choose the orientation that the device is actually mounted on your heli by choosing the matching type in the app.

x250px