Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Line 115:
Line 115: + + Line 126:
Line 128: − <br /> + + + +
no edit summary
= F - Rudder direction = <!--T:13-->
= F - Rudder direction = <!--T:13-->
1. Move rudder left/right. Servo should move tail left/right accordingly. If stick direction is inverted, use servo reverse function on radio to reverse direction.<br />
1. Move rudder left/right. Servo should move tail left/right accordingly. If stick direction is inverted, use servo reverse function on radio to reverse direction.<br />
<br />
2. Check LED color: right = blue and left = red. If LED color is incorrect, tap aileron/roll stick once to reverse LED color. Don't use reverse function on radio to change LED color! <br />
2. Check LED color: right = blue and left = red. If LED color is incorrect, tap aileron/roll stick once to reverse LED color. Don't use reverse function on radio to change LED color! <br />
<br />
<br />
<br />
<br />
Note: When the heli uses mechanical mixing (mCCPM) menu step H is not accessible and will be skipped.<br />
Note: When the heli uses mechanical mixing (mCCPM) menu step H is not accessible and will be skipped.<br />
<br />
<br />
= I - Cyclic directions = <!--T:16-->
= I - Cyclic directions = <!--T:16-->
1. Move roll/aileron to the right and push pitch/elevator forwards. Check cyclic swashplate movement. The swash should move forwards and right as well. If direction is wrong, use servo reverse function on the radio and reverse roll or pitch channel as needed.<br />
1. Move roll/aileron to the right and push pitch/elevator forwards. Check cyclic swashplate movement. The swash should move forwards and right as well. If direction is wrong, use servo reverse function on the radio and reverse roll or pitch channel as needed.<br />
<br />
2. Check LED color: Pushing the sticks forward and right, Status LED must light blue. Backwards and left is must be red. If LED color is incorrect, tap rudder stick once to reverse LED color. There are 4 possible options, only one can be correct. Don't use reverse function on radio to change LED color!<br />
2. Check LED color: Pushing the sticks forward and right, Status LED must light blue. Backwards and left is must be red. If LED color is incorrect, tap rudder stick once to reverse LED color. There are 4 possible options, only one can be correct. Don't use reverse function on radio to change LED color!<br />
<br />
<br />
= J - Servo trim = <!--T:17-->
= J - Servo trim = <!--T:17-->
Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should form a 90 degrees angle to the linkages. The swashplate must be perfectly level. Repeat this for all servos.<br />
<br />
<br />
Note: When the Status LED is off, all servos are in their true center position (1520µs pulse width).<br />
<br />
<br />