Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Line 113:
Line 113: + Line 118:
Line 119: + Line 126:
Line 128: + + Line 134:
Line 138: + Line 152:
Line 157: + Line 171:
Line 177: + + + Line 192:
Line 201: +
Marked this version for translation
<br />
<br />
<!--T:23-->
'''Helicopters with tail motor'''<br />
'''Helicopters with tail motor'''<br />
<br />
<br />
<br />
<br />
<!--T:24-->
Turn on the main throttle on the radio to start the tail motor. Now you can adjust the lowest possible running position for the tail motor using the rudder stick again. Set the motor speed to a low idle position just before the motor will quit. Then turn off main throttle and proceed to next step.<br />
Turn on the main throttle on the radio to start the tail motor. Now you can adjust the lowest possible running position for the tail motor using the rudder stick again. Set the motor speed to a low idle position just before the motor will quit. Then turn off main throttle and proceed to next step.<br />
<br />
<br />
<br />
<br />
<!--T:25-->
2. Check LED color: right = blue and left = red. If LED color is incorrect, tap aileron/roll stick once to reverse LED color. Don't use reverse function on radio to change LED color! <br />
2. Check LED color: right = blue and left = red. If LED color is incorrect, tap aileron/roll stick once to reverse LED color. Don't use reverse function on radio to change LED color! <br />
<br />
<br />
<!--T:26-->
'''Helicopters with tail motor'''<br />
'''Helicopters with tail motor'''<br />
<br />
<br />
<br />
<br />
<!--T:27-->
2. Turn on the main throttle on the radio to start the tail motor. Now you can adjust the start and hovering position for the tail motor. Tap or hold the the rudder stick and set the motor to a medium speed that will give a little push to the right, but not too much so the heli won't turn on the ground. Then turn off main throttle and proceed to next step.<br />
2. Turn on the main throttle on the radio to start the tail motor. Now you can adjust the start and hovering position for the tail motor. Tap or hold the the rudder stick and set the motor to a medium speed that will give a little push to the right, but not too much so the heli won't turn on the ground. Then turn off main throttle and proceed to next step.<br />
<br />
<br />
<br />
<br />
<!--T:28-->
2. Check LED color: Pushing the sticks forward and right, Status LED must light blue. Backwards and left is must be red. If LED color is incorrect, tap rudder stick once to reverse LED color. There are 4 possible options, only one can be correct. Don't use reverse function on radio to change LED color!<br />
2. Check LED color: Pushing the sticks forward and right, Status LED must light blue. Backwards and left is must be red. If LED color is incorrect, tap rudder stick once to reverse LED color. There are 4 possible options, only one can be correct. Don't use reverse function on radio to change LED color!<br />
<br />
<br />
<br />
<br />
<!--T:29-->
2. Check LED color: Positive pitch = blue, negative pitch = red. Tap rudder stick once to inverse color if needed.<br />
2. Check LED color: Positive pitch = blue, negative pitch = red. Tap rudder stick once to inverse color if needed.<br />
<br />
<br />
<!--T:30-->
3. Move thrust/collective stick on the radio to lowest position. Here tap or hold aileron/roll stick to adjust pitch as needed, i.e. -12.0 degrees.<br />
3. Move thrust/collective stick on the radio to lowest position. Here tap or hold aileron/roll stick to adjust pitch as needed, i.e. -12.0 degrees.<br />
<br />
<br />
<!--T:31-->
4. Move thrust/collective stick on the radio to highest position. Here tap or hold aileron/roll stick to adjust pitch as needed, i.e. +12.0 degrees.<br />
4. Move thrust/collective stick on the radio to highest position. Here tap or hold aileron/roll stick to adjust pitch as needed, i.e. +12.0 degrees.<br />
<br />
<br />
<br />
<br />
<!--T:32-->
Note: Governor feature is only available for MICROBEAST PLUS / ULTRA at the moment.<br />
Note: Governor feature is only available for MICROBEAST PLUS / ULTRA at the moment.<br />
<br />
<br />