Page history
22 April 2024
no edit summary
+9
no edit summary
+36
no edit summary
+168
no edit summary
+61
no edit summary
+21
no edit summary
-10
no edit summary
+713
no edit summary
+40
19 April 2024
no edit summary
+17
no edit summary
+18
no edit summary
-2
no edit summary
-8
no edit summary
+16
Created page with "= M - Zykl. Wegbegrenzung = Move thrust/collective stick on the radio to highest position. Carefully push cyclics (roll/aileron and pitch/elevator) to end positions. Check if..."
+8
Created page with "= L - Pitch = 1. Move thrust/collective stick and check directions. If servos are moving the swashplate in wrong direction, use servo reverse function on radio to invert thrus..."
-11
Created page with "= K - Zykl. Steuerweg = Status LED off: Make sure blade pitch is 0.0° and swashplate is level.<br /> <br /> Tap rudder stick to switch to adjustment position. Here tap or hol..."
+3
Created page with "= J - Servomitten = Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should fo..."
+1
Created page with "= I - Steuerrichtungen = 1. Move roll/aileron to the right and push pitch/elevator forwards. Check cyclic swashplate movement. The swash should move forwards and right as well..."
-1
Created page with "= H - Servo Richtungen = Tap rudder stick to select one servo after another. Move collective pitch on the radio and check servo directions. All servos must move the swash plat..."
Created page with "= G - Taumelscheibe = Tap rudder stick to select swash plate type and swash mixing (change LED color). Most R/C helis use 120° eCCPM mixing. Check your heli's manual for more..."
+1
Created page with "= F - Heck Richtung = 1. Move rudder left/right. Servo should move tail left/right accordingly. If stick direction is inverted, use servo reverse function on radio to reverse..."
-3
Created page with "= E - Heck Limit = Use rudder stick (hold or tap) to move servo to one endpoint. Wait until LED flashes, then move all the way to the other endpoint. Wait again until LED flas..."
-2
Created page with "= D - Heck Frequenz = Tap rudder stick to select frequency (change LED color). Most digital rudder servos can be used with 333Hz. Special gyro servos with 760µs pulse can go..."
-3
Created page with "= C - Heck Pulsweite = Tap rudder stick to select pulse width (change LED color). Most servos run at 1520µs (or 1500µs which is nearly the same!). Special gyro servos use 76..."
-4
Created page with "= B - Servo Frequenz = Tap rudder stick to select frequency (change LED color). Most digital servos can be used with 200Hz.<br /> <br /> Warning: If frequency is too high you..."
-3
Created page with "= A - Einbaulage = Tap rudder stick to select device orientation (change LED color). Please be very careful when choosing the orientation. A wrong orientation will cause the s..."
-8
no edit summary
+1
no edit summary
-1
no edit summary
-8
no edit summary
+2
no edit summary
-38
Updating to match new version of source page
+40
no edit summary
+3
no edit summary
-10
no edit summary
+4
Created page with "'''SETUPMENÜ Übersicht''' {| class="wikitable" id="overview" style="text-align: center; background-color: #F9DDCC; border: solid #F18308 2px;" ! MenÜ ! style="text-align: l..."
+1
Created page with "Bei NANOBEAST wird der aktuelle Menüschritt durch die Anzahl der Blinksignale der Status LED angezeigt. Im SETUPMENÜ blinkt die Status LED hierbei blau. Die Schritte A bis G..."
+11
Created page with "Beim MICROBEAST PLUS / ULTRA wird der aktuelle Menüschritt durch die gelben LEDs neben den Buchstaben signalisiert. Im SETUPMENÜ muss die Menü LED dauerhaft leuchten. Wenn..."
+49
Created page with "Hier findest Du eine Übersicht und eine kurze Beschreibung zur Ersteinrichtung im SETUPMENÜ. Weitere Details zu den einzelnen Einstellschritten findest Du in den folgenden U..."
+50
Updating to match new version of source page
+6,123
Created page with "{{TOC_BXFbl/de|Manuals:BXFbl:Setupmenu_intro/de|Manuals:BXFbl:Setupmenu_A/de|SETUPMENU|}} __NOTOC__ <br />"
+5,126