Changes

<br />

<br />

=Receivers with single wire output (single-line receivers)=

==SingleLine-Empfänger==

A single-line receiver transmits all channels (control functions) by one single connection wire to MICROBEAST PLUS. This is done by packing all channel output data to a digital data paket or by chaining the servo signals. At the moment MICROBEAST PLUS supports the following systems: Multiplex® SRLX, Spektrum® SRXL, Futaba® SBus, JR® X-Bus(B), Jeti® UDI, Jeti® EXBus, ALIGN® iBus, FlySky® iBus, Graupner HOTT® SUMD, SPPM<br />

Bei einem Singleline-Empfänger (oder Summensignal-Empfänger) werden alle Steuerbefehle (Fernsteuerkanäle) gemeinsam über nur einen einzige Anschlussleitung zum MICROBEAST PLUS übertragen. Die Kanalinformationen sind hierbei in vielen Fällen digital kodiert und die Reihenfolge in der die Kanäle übertragen werden ist nicht immer gleich, da herstellerspezifische Unterschiede bestehen. Aktuell unterstützt das MICROBEAST PLUS folgende Systeme: Multiplex® SRLX, Spektrum® SRXL/SRXL2, Futaba® SBus, JR® X-Bus(B), Jeti® UDI, Jeti® EXBus, ALIGN® iBus, FlySky® iBus, Graupner HOTT® SUMD, SPPM<br />

{{QUOTE|There are single-line receivers available that supply additional servo outputs. In combination with MICROBEAST PLUS you only have to treat such receivers as single-line receivers if you really use the single-line function. If you connect the receiver by using the standard 5-wire layout as shown above, such receiver has to be considered as "Standard receiver".}}<br />

{{QUOTE|There are single-line receivers available that supply additional servo outputs. In combination with MICROBEAST PLUS you only have to treat such receivers as single-line receivers if you really use the single-line function. If you connect the receiver by using the standard 5-wire layout as shown above, such receiver has to be considered as "Standard receiver".}}<br />