Changes

In case the function ordering of your radio system differs from the given tables below, you have to manually assign the channels/functions step by step. This is done by simply actuating the appropriate function on your transmitter at each of the Menu Points '''B''' to '''I''' ('''J''' for devices with AttitudeControl/rescue). Each menu point represents one control function.<br />

In case the function ordering of your radio system differs from the given tables below, you have to manually assign the channels/functions step by step. This is done by simply actuating the appropriate function on your transmitter at each of the Menu Points '''B''' to '''I''' ('''J''' for devices with AttitudeControl/rescue). Each menu point represents one control function.<br />

<br />

<br />

When you move the control stick/adjust the channel with the transmitter, the flashing Status LED indicates that the channel has been detected. It is important that only one channel moves on the radio whe the requested function is activated. Otherwise MICROBEAST PLUS can't recognize the desired channel. The Status LED will not flash in this case! If you have moved the wrong stick/switch, just move the correct one afterwards. MICROBEAST PLUS remembers only the last function that was operated and confirms it with blue flashing of the Status LED!

When you move the control stick/adjust the channel with the transmitter, the flashing Status LED indicates that the channel has been detected. It is important that only one channel moves on the radio when the requested function is activated. Otherwise MICROBEAST PLUS can't recognize the desired channel. The Status LED will not flash in this case! If you have moved the wrong stick/switch, just move the correct one afterwards. MICROBEAST PLUS remembers only the last function that was operated and confirms it with blue flashing of the Status LED!

<br />

<br />

{|style="text-align:left; font-size:small;"

{|style="text-align:left; font-size:small;"

<br />

<br />

* When you move the control stick/change the channel output on the transmitter, the Status LED will flash when the channel has been detected and the channel number will appear in the display. The setup will jump to the next function assignment automatically.

* When you move the control stick/change the channel output on the transmitter, the Status LED will flash when the channel has been detected and the channel number will appear in the display. The setup will jump to the next function assignment automatically.

* It is important that only one channel moves on the radio whe the requested function is activated. Otherwise MICROBEAST PLUS can't recognize the desired channel. The Status LED will not flash in this case!

* It is important that only one channel moves on the radio when the requested function is activated. Otherwise MICROBEAST PLUS can't recognize the desired channel. The Status LED will not flash in this case!

* Once a channel was assigned, it is no longer available and is ignored by MICROBEAST PLUS for the remaining process. After learning of the collective pitch function (at Menu Point B) you can enable the throttle function (remove throttle hold) to teach the throttle channel at Menu Point '''G''' with the thrust stick. The collective pitch channel will no longer be considered as this channel has been assigned already.<br />

* Once a channel was assigned, it is no longer available and is ignored by MICROBEAST PLUS for the remaining process. After learning of the collective pitch function (at Menu Point B) you can enable the throttle function (remove throttle hold) to teach the throttle channel at Menu Point '''G''' with the thrust stick. The collective pitch channel will no longer be considered as this channel has been assigned already.<br />

<br />

<br />