7,241
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + − + − + − +
Updating to match new version of source page
=Adjustment on the device=
=Adjustment on the device=
At Menu Point N of the RECEIVER MENU you teach the failsafe position for throttle channel. In case the receiver signal is interrupted during operation the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case:
At Menu Point N of the RECEIVER MENU you teach the failsafe position for throttle channel. In case the receiver signal is interrupted during operation the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case:
* if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode)
* if using a single-line receiver that turns off the signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® HOTT receiver in „SUMDOF“ mode)
* if the connection between MICROBEAST PLUS and receiver gets disconnected
* if the connection between MICROBEAST PLUS and receiver gets disconnected physically
* during initialization when the transmitter was not switched on before or was switched on too late and the radio link between transmitter and receiver is not established yet
* during initialization phase when the transmitter is not switched on or was switched on too late and the radio link between transmitter and receiver is not established yet
Additionally the failsafe position is used by the internal Governor function in case you're using a helicopter with electric drive system. Here the throttle is moved to the stored failsafe position when you set the Governor to Autorotation bailout mode!<br />
Additionally the failsafe position is used by the Governor function in case you're using a helicopter with electric drive system. Here the throttle is moved to the stored failsafe position when you switch the Governor into Autorotation mode!<br />
<br />
<br />
'''Note:'''
'''Note:'''