Changes

<translate>

<translate>

<!--T:1-->

<!--T:1-->

{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Setupmenu_C/en|Manuals:MBPlusFblV5:Setupmenu_E/en|SETUPMENU}}

{{TOC_MBPlusV5|Manuals:MBPlusFblV52:Setupmenu_C/en|Manuals:MBPlusFblV52:Setupmenu_E/en|SETUPMENU|2}}

{{DISPLAYTITLE:SETUP MENU D - Rudder servo frequency|noerror}}

{{DISPLAYTITLE:SETUP MENU D - Rudder servo frequency|noerror}}

__TOC__

__TOC__

{{TABLEV5|Rudder servo frequency |50 Hz|165 Hz|270 Hz|333 Hz|560 Hz}}

{{TABLEV5|Rudder servo frequency |50 Hz|165 Hz|270 Hz|333 Hz|560 Hz}}

<br />

<br />

'''Note:''' When you set a different pulse width with StudioXm the Status LED will be '''off'''. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />

'''Note:''' When you set a different frame rate from the StudioX app, the Status LED will be '''off'''. You can change back to a preset by tapping the rudder stick as described, but this will remove your custom setting!<br />

<br />

<br />

<br />

<br />