Changes

<!--T:1-->

<!--T:1-->

{{DISPLAYTITLE:SETUP MENU M - Servo limit|noerror}}

{{DISPLAYTITLE:SETUP MENU M - Servo limit|noerror}}

{{TOC_MBPlusV5|Manuals:MBPlusFblV52:Setupmenu_K/en|Manuals:MBPlusFblV52:Setupmenu_M/en|SETUPMENU|2}}

{{TOC_MBPlusV5|Manuals:MBPlusFblV52:Setupmenu_L/en|Manuals:MBPlusFblV52:Governor_A/en|SETUPMENU|2}}

__TOC__

__TOC__

<br />

<br />

=Adjustment on the device= <!--T:3-->

=Adjustment on the device= <!--T:3-->

At SETUP MENU point L carefully move pitch, aileron and elevator all at once and into all possible positions and check if there is some point where the servos get jammed. By '''rudder''' stick input you can '''increase/decrease the amount of maximum servo throw/servo limit''' (left = decrease throw, right = increase throw). Make sure the throw is as high as possible.<br />

At SETUP MENU point M carefully move pitch, aileron and elevator all at once and into all possible positions and check if there is some point where the servos get jammed. By '''rudder''' stick input you can '''increase/decrease the amount of maximum servo throw/servo limit''' (left = decrease throw, right = increase throw). Make sure the throw is as high as possible.<br />

<br />

<br />

<br />

<br />