7,241
edits
Changes
Jump to navigation
Jump to search
Line 82:
Line 82: − <br /> − − '''A third alternative is to use the bank switching feasture and set the attitude gains fixed for each flight mode.''' In this case the AttitudeControl will be active as long as the flight mode is selected. So you could use one bank/flight mode for hovering and sports flying, one flight mode for 3D aerobatics and a third one with angular mode. Gain adjustments and parameter settings are all done in the StudioX software or StudioXm app and you can switch between modes using a simple 3-position switch. In this respect also note that you can even combine flightmodes with a separate rescue switch channel! So you could have one mode where AttitudeControl is always on, i.e. when using angular mode and then you have your other to flightmodes/banks for unstabilized flying but in which you can pull the rescue bailout at any time.<br /> Line 91:
Line 88: + + +
Manuals:MBPlusFblV5:AttitudeControl/en (view source)
Revision as of 10:58, 12 February 2018
, 6 years agoUpdating to match new version of source page
|width="200pt" style="padding:0px 20px; vertical-align: top;"|Use the servo monitor to check if the gain channel is changing direction when actuating the "rescue switch".
|width="200pt" style="padding:0px 20px; vertical-align: top;"|Use the servo monitor to check if the gain channel is changing direction when actuating the "rescue switch".
|}<br />
|}<br />
<br />
<br />
[[File:Warning.png|sub|18px]] Also note that in this mode it is absolutely necessary to use a switch that changes the control directions directly and without intermediate steps. In particular, do not use a slider on the transmitter! Otherwise, when you activate AttitudeControl the tail gyro sensitivity would be decreased to 0% before the system turns on the AttitudeControl. So you would have 0% of tail gyro gain when AttitudeControl is active.}}<br >
[[File:Warning.png|sub|18px]] Also note that in this mode it is absolutely necessary to use a switch that changes the control directions directly and without intermediate steps. In particular, do not use a slider on the transmitter! Otherwise, when you activate AttitudeControl the tail gyro sensitivity would be decreased to 0% before the system turns on the AttitudeControl. So you would have 0% of tail gyro gain when AttitudeControl is active.}}<br >
<br >
<br >
'''A third alternative is to use the bank switching feasture and set the attitude gains fixed for each flight mode.''' In this case the AttitudeControl will be active as long as the flight mode is selected. So you could use one bank/flight mode for hovering and sports flying, one flight mode for 3D aerobatics and a third one with angular mode. Gain adjustments and parameter settings are all done in the StudioX software or StudioXm app and you can switch between modes using a simple 3-position switch. In this respect also note that you can even combine flightmodes with a separate rescue switch channel! So you could have one mode where AttitudeControl is always on, i.e. when using angular mode and then you have your other to flightmodes/banks for unstabilized flying but in which you can pull the rescue bailout at any time.<br />
<br />
==Functional test of AttitudeControl==
==Functional test of AttitudeControl==