Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + Line 5:
Line 6: + Line 12:
Line 14: − + Line 30:
Line 32: + Line 35:
Line 38: − + − +
Marked this version for translation
<translate>
<translate>
<!--T:1-->
{{DISPLAYTITLE:PARAMETER MENU B - Control Style|noerror}}
{{DISPLAYTITLE:PARAMETER MENU B - Control Style|noerror}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Quicktrim/en|Manuals:MBPlusFblV5:ParameterMenu/en|GOVMENU}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Quicktrim/en|Manuals:MBPlusFblV5:ParameterMenu/en|GOVMENU}}
<br />
<br />
<!--T:2-->
MICROBEAST PLUS transfers the stick inputs of roll, elevator and rudder as commands to rotate the heli with a given speed. When the sticks are in center position this means "do not rotate". On the other hand when you move the stick(s) to a specific amount of full deflection it is not settled how fast the helicopter will rotate. Here comes the control style setting into play which allows to choose between different control behaviors/control styles for your helicopter. This includes the maximum rotation rate of the helicopter as well as how sensitive MICROBEAST PLUS will react to stick inputs for aileron, elevator and rudder around the stick centre (Stick expo).<br />
MICROBEAST PLUS transfers the stick inputs of roll, elevator and rudder as commands to rotate the heli with a given speed. When the sticks are in center position this means "do not rotate". On the other hand when you move the stick(s) to a specific amount of full deflection it is not settled how fast the helicopter will rotate. Here comes the control style setting into play which allows to choose between different control behaviors/control styles for your helicopter. This includes the maximum rotation rate of the helicopter as well as how sensitive MICROBEAST PLUS will react to stick inputs for aileron, elevator and rudder around the stick centre (Stick expo).<br />
<br />
<br />
<br />
<br />
=Adjustment at the device=
=Adjustment at the device= <!--T:3-->
The control style is set at PARAMETER MENU point B at the device (to enter this menu point briefly push and hold the button from operation mode, so Menu LED A flashes, then again brifly push the button so Menu LED B flashes). The choice is done by moving the rudder stick in one direction until the LED indicates the desired color and state. To find your individual preference increase the option step by step. <br />
The control style is set at PARAMETER MENU point B at the device (to enter this menu point briefly push and hold the button from operation mode, so Menu LED A flashes, then again brifly push the button so Menu LED B flashes). The choice is done by moving the rudder stick in one direction until the LED indicates the desired color and state. To find your individual preference increase the option step by step. <br />
<br />
<br />
<br />
<br />
<!--T:4-->
{{WARNING_QUOTE|When using predefined control behaviors other than "transmitter" we do not recommend to additionally adjust control curves (Expo/Dual rates) in your transmitter as this will indefinably mix the preset curves of MICROBEAST PLUS with the curves of the transmitter! Anyhow, if you only make small adjustments (e.g. slightly increasing the throw to increase rotation rate) this should be no problem.<br />
{{WARNING_QUOTE|When using predefined control behaviors other than "transmitter" we do not recommend to additionally adjust control curves (Expo/Dual rates) in your transmitter as this will indefinably mix the preset curves of MICROBEAST PLUS with the curves of the transmitter! Anyhow, if you only make small adjustments (e.g. slightly increasing the throw to increase rotation rate) this should be no problem.<br />
<br />
<br />
<br />
<br />
=Setup with StudioX=
=Setup with StudioX= <!--T:5-->
<br />
<br />
<br />
<br />
<br />
<br />
=Setup with StudioXm=
=Setup with StudioXm= <!--T:6-->
<br />
<br />
<br />
<br />