Changes

= Performing factory reset at the device =

= Performing factory reset at the device =

To perform the reset enter SETUP MENU. Release the button once and push and hold it again. Keep the button pressed for at least 15 seconds. You will see the Menu LEDs cycling down from A to N. This shows factory reset was performed. The system will exit SETUP MENU when you release the button. Now all settings are set to default and you have to perform the [[Manuals:MBPlusFblV5:Setupmenu_intro/en|Basic Setup]] again in order to fly the helicopter.<br />

To perform the reset enter SETUP MENU. Release the button once and push and hold it again. Keep the button pressed for at least 15 seconds. You will see the Menu LEDs cycling down from A to N. This shows factory reset was performed. The system will exit SETUP MENU when you release the button. Now all settings are set to default and you have to perform the [[Manuals:MBPlusFblV5:Setupmenu_intro/en|Basic Setup]] again, in order to fly the helicopter.<br />

<br />  

<br />  

[[File:MBPlus_Reset_noheader.png|x400px|none]]<br />

[[File:MBPlus_Reset_noheader.png|x400px|none]]<br />

<br />

<br />

= Factory reset with StudioXm =

= Factory reset with StudioX =

When using the StudioXm App/Software you can perform the factory reset by computer (requires USB2SYS interface) or with your smartphone/tablet (requires BLE2SYS interface). You will find the reset option by choosing "Backup/Restore" from the overview screen in StudioX which opens when connection is established to your MICROBEAST PLUS.

When using the StudioX app/software you can perform the factory reset by computer (requires USB2SYS interface) or with your smartphone/tablet (requires BLE2SYS interface). You will find the reset option by choosing "Backup/Restore" from the overview screen in StudioX (which opens when connection is established to your MICROBEAST PLUS). From there click the "Next" button two times or directly choose "Factory reset" from the selection box above to open the reset screen.<br />