Bureaucrats, Administrators, translate-proofr
15,475
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: − + − <br /> + + Line 99:
Line 100: − + +
no edit summary
=Einstellung am Gerät=
=Adjustment at the device=
<br />
<br />
The gyro gain and gyro operation mode can be directly adjusted from the transmitter. The other parameters mentioned above can be set by turning the dials on the device into a specific position. '''To adjust the dials please only use the supplied plastic BEASTX adjustment tool to prevent damage to the dials!'''<br />
<br />
<br />
[[File:Dials_overview.png|noframe|none|x160px]]<br />
==Tail gyro==
==Tail gyro==
<br />
<br />
=Einstellung mit StudioX=
=Setup with StudioX=
When you're using the optional available PROEDITION firmware in combination with the Bank Switch feature you can set the parameters for the tail gyro and cyclic control loop in the StudioX app independant for all three flight modes. The dials on the device have no effect in this case. The auxiliary channel for adjusting the gyro gain is used to switch between banks (flight modes) instead of adjusting the gyro gain (see the page [[Manuals:MBPlusFblV5:BankSwitch/en|Bank Switching]] for more detailed information).
<br />
<br />
<br />
<br />
<br />
<br />