Changes

<br />

<br />

Similar to GOVERNOR MENU point A here we will only get some status information. At GOVERNOR MENU point D the different activation points of the RPM Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Headspeed Governor function. The information conveyed by the Status-LED is basically the same in every Governor operation mode:

Similar to GOVERNOR MENU point A here we will only get some status information. At GOVERNOR MENU point D the different activation points of the Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Headspeed Governor function. The information conveyed by the Status-LED is basically the same in every Governor operation mode:

<p>Governor off = '''off''', Autorotation = <font color="purple">'''purple'''</font>, Gov active = <font color="#FF3300">'''red'''</font> or <font color="#0066FF">'''blue'''</font> (= max. RPM)</p>

<p>Governor off = '''off''', Autorotation = <font color="purple">'''purple'''</font>, Gov active = <font color="#FF3300">'''red'''</font> or <font color="#0066FF">'''blue'''</font> (= max. RPM)</p>

However, the setup of the transmitter and the range of headspeed will be slightly different, depending on whether the mode '''electric''' or '''nitro''' is used.<br />

However, the setup of the transmitter and the range of headspeed will be slightly different, depending on whether the mode '''electric''' or '''nitro''' is used.<br />