Created page with "===Versionsanzeige=== <p>'''Bitte beachten Sie, dass diese Bedienungsanleitung nur für die MICROBEAST PLUS Softwareversion 5.x.x gültig ist!'''</p> <p>Die Softwareversion ka..."
Line 62:
Line 62:
<div style="clear:both;"></div>
<div style="clear:both;"></div>
−
==Firmware version display==
+
===Versionsanzeige===
−
<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 5.x.x!'''</p>
+
<p>'''Bitte beachten Sie, dass diese Bedienungsanleitung nur für die MICROBEAST PLUS Softwareversion 5.x.x gültig ist!'''</p>
−
<p>The firmware version can be detected by connecting the device to a computer using the USB2SYS
+
<p>Die Softwareversion kann am Computer über die StudioX Software (benötigt USB2SYS Interface) oder über die StudioXm App mit dem Smartphone/Tablet (benötigt BLE2SYS Interface) ausgelesen werden. Darüber hinaus wird die Version während der Initialisierungsphase nach dem Einschalten direkt am MICROBEAST PLUS angezeigt: Während Status LED rot leuchtet zeigen die gelben Menü LEDs A - G die erste Stelle und die LEDs H - N die zweite Stelle der aufgespielten Software an.</p>
−
interface (optional) or tablet/smartphone using the BLE2SYS interface (optional) together with the StudioX App. During initialization also you can directly read from the display of the device what firmware version it is running:
−
After power up when the Status-LED lights red, for a few seconds the Menu-LEDs A to G display the first digit of the firmware version and the LEDs H to N the