PARAMETER MENU - Advanced settings

From BEASTX Wiki
Revision as of 14:24, 15 January 2018 by Shornstein (talk | contribs) (Marked this version for translation)
Jump to navigation Jump to search


MICROBEAST PLUS V5

1. Introduction

2. Box content and accessories

3. Hardware installation

4. Radio system

5. Receiver Menu

6. Basic setup
Device orientation
Swashplate servos
Rudder pulse width
Rudder frequency
Rudder control
Swash mixing
Servo trim
Servo directions
Cyclic throw
Collective pitch
Servo limit
Cyclic directions
7. Headspeed Governor
Activating the governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
8. Additional settings
Trimming
Control style
Special parameters
Gains

9. AttitudeControl (Self leveling)

10. Bank Switching

11. Factory reset

12. Version information

13. Firmware update

← →


Adjustment at the device




Setup with StudioX




Setup with StudioXm




Retrieved from "https://wiki.beastx.com/index.php?title=Manuals:MBPlusFblV5:Parametermenu&oldid=14509"